Jump to content
  • Sign Up

Billet box corner


Recommended Posts

What’s your favorite bridge?

I have several bridges ranging from Chinese made to so-called high end, but I hate to say that I enjoy the Chinese ones the most, the BP mods insider and the Aspire Prestige Qbix are the ones I use the most.

I tried the euc bridge but I wouldn’t recommend those coils, they are harsh to vape off and they don’t last that long imo.

 

  • Love 7
Link to comment
Share on other sites

i am in the same boat i have every rba pretty much but the mission xv orbit and brdgd v2 both have 3.5 mm airflow and that makes all he difference. those are my go to bangers for rdl dl with a borro. im curious about the 520 borro coming out along side of the smallest borro mod using an 18650 the cthulhu aio basically a dot aio but using a full size borro. those two look interesting smallest mod in its class and biggest airflow rba borro, without a pin its 4.5mm airflow on the 520 and both are cheap, well  in the borro world that is $65 for the mod i think

  • Love 2
Link to comment
Share on other sites

I think I have just about every bridge out there except the Mobb one but I don't think I need any more bridges. So far what I like the best is the newest Wick'D  Engraved Bridg'D 2 EDC) Multi-Purpose Tool - COP Edition also has a 4mm air flow pin!

 

 

 

Edited by Michael Goofman
  • Love 1
Link to comment
Share on other sites

Hey! I’m fairly new to the Billet Box/Boro scene but I picked up a BB Paua SLR a few months ago & I must say so far I’m really enjoying the experience, it’s certainly a bit different to my usual Filipino mechs & RDA’s but it’s a pleasant change, I’m currently running the Mission KRMA, Atmizoo VapeSnail, Signature Tips Truss & Wick’D Bridg’D V2 Bridges, on the hunt for a Harpy Harbo-r Dicodes 60 now 🙂

  • Like 1
Link to comment
Share on other sites

15 minutes ago, Craig Eden said:

Hey! I’m fairly new to the Billet Box/Boro scene but I picked up a BB Paua SLR a few months ago & I must say so far I’m really enjoying the experience, it’s certainly a bit different to my usual Filipino mechs & RDA’s but it’s a pleasant change, I’m currently running the Mission KRMA, Atmizoo VapeSnail, Signature Tips Truss & Wick’D Bridg’D V2 Bridges, on the hunt for a Harpy Harbo-r Dicodes 60 now 🙂 
My favourite bridges so far are the Atmizoo & the Wick’D

 

Link to comment
Share on other sites

3 hours ago, Craig Eden said:

Hey! I’m fairly new to the Billet Box/Boro scene but I picked up a BB Paua SLR a few months ago & I must say so far I’m really enjoying the experience, it’s certainly a bit different to my usual Filipino mechs & RDA’s but it’s a pleasant change, I’m currently running the Mission KRMA, Atmizoo VapeSnail, Signature Tips Truss & Wick’D Bridg’D V2 Bridges, on the hunt for a Harpy Harbo-r Dicodes 60 now 🙂

Don't buy that one, they totally lack of QC and customer service, I've seen many HarBor with falling magnets, issues with doors and problems with board.  Besides they're pretty hyped and people buy them just to flip and resell at stupid prices.

There are much better choices like the SVA AIO, Hussar BXR, Protocol ION Box, etc...

 

Edited by Alex R
  • Like 1
Link to comment
Share on other sites

2 minutes ago, Alex R said:

Don't buy that one, they totally lack of QC and customer service, I've seen many HarBor with falling magnets, issues with doors and problems with board.  Besides they're pretty hyped and people buy them just to flip and resell at stupid prices.

There are much better choices like the SVA AIO, Hussar BXR, Protocol ION Box, etc...

 

Cheers Buddy, thanks for your advice & knowledge, it’s very much appreciated, I’ll look into some of those other options you suggested! Thanks again! 

Link to comment
Share on other sites

On 11/22/2021 at 8:49 PM, VendettaVaper said:

i am in the same boat i have every rba pretty much but the mission xv orbit and brdgd v2 both have 3.5 mm airflow and that makes all he difference. those are my go to bangers for rdl dl with a borro. im curious about the 520 borro coming out along side of the smallest borro mod using an 18650 the cthulhu aio basically a dot aio but using a full size borro. those two look interesting smallest mod in its class and biggest airflow rba borro, without a pin its 4.5mm airflow on the 520 and both are cheap, well  in the borro world that is $65 for the mod i think

I have the Cthulhu AIO and it is compact and the chip reads accurate. I haven't tried temperature control yet.  I like it except will have to wait and see if  some modders make panels for it. 

Link to comment
Share on other sites

1 hour ago, Don Iocco said:

I have the Cthulhu AIO and it is compact and the chip reads accurate. I haven't tried temperature control yet.  I like it except will have to wait and see if  some modders make panels for it. 

CarrotLaboratories already make some nice acrylic panels with different designs for the Cthulhu AIO (and most other AIO mods), they have a FB group.

  • Love 1
Link to comment
Share on other sites

On 11/22/2021 at 3:06 PM, Edwin Spiegelenberg said:

I tried the euc bridge but I wouldn’t recommend those coils, they are harsh to vape off and they don’t last that long imo.

 

Eh, EUC coils can be a pain to prime.  you have to let them sit for a couple hours with juice in them, then slowly ramp up the wattage from around 5 watts or so.  otherwise it messes the coil up.  I've used em with pretty good success, but everyone is different.  The mini EUC coils can be more of a pain but it's the same procedure.

Link to comment
Share on other sites

4 hours ago, Jim Vv said:

CarrotLaboratories already make some nice acrylic panels with different designs for the Cthulhu AIO (and most other AIO mods), they have a FB group.

I will check Carrot laboratories out. Something I forgot to check on that Cthulhu RBA is if I take it apart would my other bridges actually fit in it.  Like a front filling boro. Which hasn't been made in years. 

 

Link to comment
Share on other sites

  • 2 weeks later...
1 hour ago, Jay said:

What do you recommend for a boro virgin

I would start with something not to expensive just to see if you like it or not.

Because not everybody likes to fiddle with small RBA's, liquid all over your hands etc if you want to rewick the thing.

There is no shame in the Chtulhu AIO kit, yes it's Chinese and don't expect a high end feeling but it does the job for less then 100 bucks.

Starter rba BP Mods pioneer insider maybe.

If money isn't an issue then be prepared to pay silly prices for a super tiny rba and expensive mods 😅

Link to comment
Share on other sites

7 hours ago, Jay said:

What do you recommend for a boro virgin

I think you’re already gonna be set for a boro mod and are looking for a recommendation on the RBA part. 
 

If that’s the case you can get the BP Mods Pioneer Insider for around $60 and it’s not hard to find. Jai did a review on it and despite disliking the name rated it a 7 on performance but took a half point/point because of the name. 

  • Like 1
Link to comment
Share on other sites

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...